Replace Transfer Unit - Xerox Phaser 6280 Service Manual

Error Messages and Codes

Replace Transfer Unit

Applicable Chain Link
Initial Actions
3-72
The Transfer Unit has reached its end of life.
Chain Link 094-011: IOT Transfer Unit Life Over
Check the Transfer Unit life using CentreWare IS.
Cycle printer power.
If problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Transfer Unit, PL4.1.1
MCU Board, PL9.1.20
Troubleshooting Procedure Table
Step Actions and Questions
1. Check the Transfer Unit life:
1
Mode > Parameter
2. Does the number show the maximum life
page?
2 Does the error still occur?
Wiring and Plug/Jack Map References
Yes
Service Replace the
> Life DTB Feed. Transfer Unit
(page 8-8).
Replace the
MCU Board
(page 8-86).
Phaser 6280 Color Laser Printer Service Manual
No
Go to step 2.
Complete.