Disk Full
Phaser 6280 Color Laser Printer Service Manual
RAM disk memory or hard disk drive if full and cannot continue processing the
current print job.
Applicable Chain Link
Chain Link
Initial Actions
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Image Processor Board, PL9.1.27
Memory Card (Option), PL9.1.30
Troubleshooting Procedure Table
Step
Actions and Questions
1. Check the required memory for the
1
print job.
2. Print a small size file (example as a
Windows test print).
3. Does the error still occur?
1. Reseat the memory card
2
(page 8-91).
2. Does the error still occur?
1. Check the memory card capacity.
3
Print the printer Configuration Page:
Menu
Configuration.
2. Does the memory meet the print job
requirements?
1. Replace the memory card
4
(page 8-91).
2. Does the error still occur?
016-982: Disk Full
Wiring and Plug/Jack Map References
>
Information Pgs
>
Error Messages and Codes
Yes
No
Go to step 2.
Add memory
card or separate
the print job.
Go to step 3.
Complete.
Go to step 4.
Replace the
Image
Processor
Board
(page 8-87).
Replace the
Complete.
Image
Processor Board
(page 8-87).
3-103