Engine Nvram Error - Xerox phaser 6250 Service Manual

Engine NVRAM Error

Code 83:
Engine NVRAM is corrupted or receiving wrong data from a CRUM.
Troubleshooting Procedure Table
Steps Actions and Questions
1 Cycle power to the printer.
Does the error still appear?
2 Remove and reinstall the Imaging Unit
and Fuser Assembly. Does the error recur
after the power has been turned off and
then on?
3 Does the error recur if the Imaging Unit is
replaced and the power has been turned
off and then on?
4 Does the error recur if the Fuser
Assembly is replaced and the power has
been turned off and then on?
5
Does the error recur if the EEPROM
board is replaced and the power has
been turned off and then on?
Error Messages and Codes
Yes
Go to Step 2.
Go to Step 3.
Go to Step 4
Go to Step 5
Replace the Engine
Control Board,
page 8-107
manuals4you.com manuals4you.com
No
Complete
Complete
Complete
Complete
Complete
3-75