Laser Error - Xerox Phaser 6280 Service Manual

Laser Error

Phaser 6280 Color Laser Printer Service Manual
An error was detected in the Laser Unit.
Applicable Chain Link
Chain Link
Initial Actions
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Laser Unit, PL5.1.2
MCU Board, PL9.1.20
Troubleshooting Procedure Table
Step Actions and Questions
1 1. Check the Laser Unit for correct
installation.
2. Is the Laser Unit correctly installed?
Does the error still occur?
2
1. Check the wiring harness
3
connectors P/J12 and P/J151
between the MCU Board and the
Laser Unit.
2. Are the connectors securely
connected?
Does the error still occur?
4
5 1. Check the MCU Board for correct
installation.
2. Is the MCU Board correctly
installed?
Does the error still occur?
6
1. Replace the Laser Unit (page 8-50).
7
2. Does the error still occur?
061-370: IOT ROS Failure
Wiring and Plug/Jack Map References
"Map 2 - Laser Unit, Feeder Assembly"
on page 10-10
"Map 4 - LVPS and MCU Boards" on
page 10-12
"Laser Unit" on page 10-29
Error Messages and Codes
Yes No
Go to step 3. Reseat the
Laser Unit
(page 8-50).
Go to step 2.
Go to step 3. Complete.
Go to step 5 Reconnect the
connectors.
Go to step 4.
Go to step 5. Complete.
Go to step 7. Reseat the MCU
Board
(page 8-86).
Go to step 6.
Go to step 7. Complete.
Replace the Complete.
MCU Board
(page 8-86).
3-129