Error Messages and Codes
Tray 2 (PH) Motor Error
Applicable Chain Link
Initial Actions
3-124
The Tray 2 Motor has failed.
Chain Link
042-325-03: IOT Motor Failure
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Feeder Assembly, PL3.2.1
PH Drive Assembly, PL8.1.7
MCU Board, PL9.1.20
Right Side Harness, PL10.1.15
Troubleshooting Procedure Table
Step
Actions and Questions
1. Check the detailed error code (press
1
the Up and Down buttons
simultaneously).
2. Does code "03" display on the
Control Panel?
1. Check the Rubber Registration
2
Roller for rotation.
2. Does the Roller rotate smoothly?
3
1. Check the wiring harness
connectors P/J25 and P/J251
between the MCU Board and the PH
Drive Assembly.
2. Are the connectors securely
connected?
Wiring and Plug/Jack Map References
"Map 1 - Electrical and Drive" on
page 10-9
"Map 4 - LVPS and MCU Boards" on
page 10-12
"Tray 1 (MPT) and Registration" on
page 10-23
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Phaser 6280 Color Laser Printer Service Manual
No
Refer to
"Main Motor
Error" on
page 3-120
Refer to "Sub
Motor Error" on
page 3-122
Refer to
"Optional
Feeder Motor
Error" on
page 3-126
Replace the
Feeder
Assembly
(page 8-36).
Reconnect the
connectors.
Go to step 4.