Engine Nvram Error - Xerox Phaser 6250 Service Manual

Engine NVRAM Error

Code 83:
Engine NVRAM is corrupted or receiving wrong data from a CRUM.
Troubleshooting Procedure Table
Steps Actions and Questions
1 Cycle power to the printer.
Does the error still appear?
2 Remove and reinstall the Imaging Unit
and Fuser Assembly. Does the error recur
after the power has been turned off and
then on?
3 Does the error recur if the Imaging Unit is
replaced and the power has been turned
off and then on?
4 Does the error recur if the Fuser
Assembly is replaced and the power has
been turned off and then on?
5
Does the error recur if the EEPROM
board is replaced and the power has
been turned off and then on?
3-80 Phaser 6250 Color Laser Printer Service Manual
Yes
Go to Step 2.
Go to Step 3.
Go to Step 4
Go to Step 5
Replace the Engine
Control Board,
page 8-107
No
Complete
Complete
Complete
Complete
Complete