Open Door A - Xerox Phaser 6280 Service Manual

Open Door A

Phaser 6280 Color Laser Printer Service Manual
Transparency Set has occurred.
Applicable Chain Link
Chain Link
Initial Actions
Inspect the tray to ensure that it is free of obstructions, is loaded with
supported paper, and the Guides are adjusted correctly.
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
K Drive Assembly, PL8.1.10
MCU Board, PL9.1.20
Troubleshooting Procedure Table
Step Actions and Questions
1 1. Check the paper type.
2. Is the paper type correct?
2 1. Check the paper type setting.
2. Does the paper match with the
settings in the Control Panel?
1. Check the MCU Board for correct
3
installation. Reseat the MCU Board
(page 8-86).
2. Does the error still occur?
077-906: IOT Transparency Set Error
Wiring and Plug/Jack Map References
Error Messages and Codes
Yes No
Go to step 2. Replace the
paper.
Go to step 3. Correct the
paper settings
in the Control
Panel.
Go to step 3.
Replace the Complete.
MCU Board
(page 8-86).
3-91