Load Tray 2 (No Suitable Paper) - Xerox Phaser 6280 Service Manual

Error Messages and Codes

Load Tray 2 (No Suitable Paper)

Applicable Chain Link
Initial Actions
3-86
The type or size of paper mismatched or Tray 2 is empty.
Chain Link 024-959: No Suitable Paper
Inspect the tray to ensure that it is free of obstructions, is loaded with
supported paper, and the Guides are adjusted correctly.
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Tray 2, PL2.1.24
Feeder Assy., PL3.2.1
Tray 2 No Paper Sensor, PL3.2.30
Registration Sensor Harness,
PL3.2.37
No Paper Actuator, PL3.2.49
MCU Board, PL9.1.20
Right Side Harness, PL10.1.15
Troubleshooting Procedure Table
Step Actions and Questions
1 1. Check the paper size.
2. Does the paper size meet
specifications?
2 1. Check the paper size setting.
2. Does the paper match with the
settings in the Control Panel?
3 Check the paper type.
Paper in the tray
Paper type setting in the Control
Panel
Paper type of the printing job
4 1. Reseat Tray 2.
2. Does the error still occur?
Wiring and Plug/Jack Map References
"Map 2 - Laser Unit, Feeder Assembly"
on page 10-10
"Map 4 - LVPS and MCU Boards" on
page 10-12
"Feeder" on page 10-27
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Go to step 5.
Phaser 6280 Color Laser Printer Service Manual
No
Replace the
paper with the
correct
specifications.
Correct the
paper settings
in the Control
Panel.
Go to step 3.
Correct the
paper type
setting in the
Control Panel.
Complete.