Engine NVRAM Error
Code 83:
Engine NVRAM is corrupted or receiving wrong data from a CRUM.
Troubleshooting Procedure Table
Steps
Actions and Questions
Cycle power to the printer.
1
Does the error still appear?
Remove and reinstall the Imaging Unit
2
and Fuser Assembly. Does the error recur
after the power has been turned off and
then on?
Does the error recur if the Imaging Unit is
3
replaced and the power has been turned
off and then on?
Does the error recur if the Fuser
4
Assembly is replaced and the power has
been turned off and then on?
Does the error recur if the EEPROM
5
board is replaced and the power has
been turned off and then on?
Error Messages and Codes
Yes
Go to Step 2.
Go to Step 3.
Go to Step 4
Go to Step 5
Replace the Engine
Control Board,
page 8-107
No
Complete
Complete
Complete
Complete
Complete
3-75