Xerox Phaser 6280 Service Manual page 350

General Troubleshooting
Exit Clutch
4-62
1. Enter the Service Diagnostic menu (page 4-5).
2. Run the Exit Clutch test:
3. Verify that the Exit Roller is not rotating.
4. Press the Cancel button to stop the test.
Combination Test
1. Enter the Service Diagnostic menu (page 4-5).
2. Perform the Main Motor (FULL2) test:
Motor (FULL2).
3. While the Main Motor is running, press the Up Arrow button to find
Clutch. Press the OK button to run the Exit Clutch test.
Note
The Exit Roller rotates when the Main Motor (FULL2) and the Exit Clutch
tests are executed.
4. Verify that the Main Motor is working and the Exit Roller is rotating.
5. Press the Cancel button to stop the Exit Clutch test.
6. Press the Down Arrow button to find
7. Press the Cancel button to stop the Main Motor test.
Engine Diag > Motor Test
Engine Diag
Exit Roller
Main Motor
Phaser 6280 Color Laser Printer Service Manual
> Exit Clutch.
> Motor Test > Main
Exit
s6280-157
(FULL2).