Operating Mode - Xerox Phaser 6280 Service Manual

Operating Mode

Phaser 6280 Color Laser Printer Service Manual
Mode Condition
Running Mode
Fusing
Exposure
Recording
Cooling Fan
Control Panel
Operation
Standby Mode
Fusing
Exposure
Recording
Cooling Fan
Control Panel
Operation
Power Saver
Mode
Fusing
Exposure
Recording
Cooling Fan
Control Panel
Operation
Note: When the printer receives a print job or the Wake Up button is pressed, the
printer exits the Power Saver mode and enters the Ready mode.
General Information
Description
The printer is under operating condition
such as running or recording.
The system keeps the operating
temperature.
The Laser Unit Motor runs at the running
speed.
The system is under operating condition.
The fan operates at high speed.
LCD - Backlight: On
LED - Ready LED is turned On.
The printer is under standby condition.
The system keeps the standby temperature.
The system is at Pause.
The system is at Pause.
The fan operates at low speed.
LCD - Backlight: On
LED: If printer is online, Ready LED is
turned On.
The printer enters into the Power Saver
mode to reduce power consumption when it
has not received print data for the specified
time.
The time to enter into the Power Saver
mode can be selected from 5 to 60 minutes
increment by 1 minute. The default Power
Save mode is 30 minutes.
The system is Off.
The system is at Pause.
The system is at Pause.
The system is Off.
LCD: Off, LCD Backlight: Off
LED: Power Saver LED is turned On.
1-17