Error Messages and Codes
MACPHY Internal Loop Test Error
Applicable Chain Link
Initial Actions
3-150
MACPHY Internal Loop Test error occurs.
Chain Link
116-393: MACPHY Int Loop Test Error (Diag Mode)
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Image Processor Board, PL9.1.27
Troubleshooting Procedure Table
Step
Actions and Questions
1. Reboot the printer.
1
2. Does the error still occur?
1. Reseat the Image Processor Board
2
(page 8-87).
2. Does the error still occur?
Wiring and Plug/Jack Map References
Yes
Go to step 2.
Replace the
Image
Processor Board
(page 8-87).
Phaser 6280 Color Laser Printer Service Manual
No
Complete.
Complete.