Xerox Phaser 6280 Service Manual page 363

Phaser 6280 Color Laser Printer Service Manual
Troubleshooting Procedure Table (continued)
Step Actions and Questions
5 1. Check the Main Drive Assembly for
correct installation. Reseat the Main
Drive Assembly (page 8-70).
2. Perform the Main Motor test (page 4-41):
Service Mode
Test > Main Motor.
3. Does the noise come from the printer?
6 1. Perform the Sub Motor test (page 4-42):
Service Mode
Test > Sub Motor.
2. Does the noise come from the printer?
1. Check the Print Cartridges for correct
7
installation. Reseat the Print Cartridges
(page 8-10).
2. Perform the Sub Motor test (page 4-42):
Service Mode
Test > Sub Motor.
3. Does the noise come from the printer?
8 1. Check the Main Drive Assembly for
correct installation. Reseat the Main
Drive Assembly (page 8-70).
2. Reseat the Main Drive Assembly
(page 8-70).
3. Perform the Sub Motor test (page 4-42):
Service Mode
Test > Sub Motor.
4. Does the noise come from the printer?
1. Perform the Tray 2 Motor test
9
(page 4-43): Service Mode
Diag > Motor Test
2. Does the noise come from the printer?
10 1. Perform the Option Feeder Motor test
(page 4-45): Service Mode
Diag > Motor Test
2. Does the noise come from the printer?
> Engine Diag > Motor
> Engine Diag > Motor
> Engine Diag > Motor
> Engine Diag > Motor
> Engine
> Tray 2 Motor.
> Engine
> Tray 3 Feed Motor.
General Troubleshooting
Yes No
Replace the Complete.
following
parts, one
after another.
Fuser
(page 8-11)
Black Print
Cartridge
(page 8-10)
Transfer
Unit
(page 8-8)
Main Drive
Assembly
(page 8-70)
Go to step 7. Go to step 9.
Go to step 8. Complete.
Replace the Complete.
following
parts, one
after another.
Print
Cartridges (C/
M/Y/K)
(page 8-10)
Main Drive
Assembly
(page 8-70)
Go to step 11. Complete.
if the Optional
550-Sheet
Feeder is
installed, go
to step 10.
Replace the Complete.
Tray 3 Feeder
(page 8-107).
4-75