Service Parts Disassembly
8-22
Note
Be sure not to move the Harness Cover away from the Front Cover
Assembly too far, because the Harness Cover is secured to the Front
Cover Harness Assembly.
7.
Remove 4 screws (10 mm) securing the Harness Cover (PL1.2.5).
8.
Remove the Harness Cover from the Front Cover Assembly.
9.
Disconnect the wiring harness connector P/J220 from the Control Panel
(PL1.2.16).
10.
Remove the Control Panel wiring harness from the Front Cover Assembly.
P/J220
Control Panel Harness
Control Panel Harness
Front Cover Harness
Phaser 6280 Color Laser Printer Service Manual
Harness Cover
Front Cover
Harness
s6280-185