Residual Image Or Ghosting - Xerox Phaser 6280 Service Manual

Print-Quality Troubleshooting

Residual Image or Ghosting

Initial Actions
5-44
There are faint, ghostly images appearing on the page. The images may be
either from a previous page or from the page currently being printed.
Check the paper transfer path.
Ensure there are no debris on the transfer path.
Troubleshooting Reference Table
Applicable Notes
Transfer Unit, PL4.1.1
Print Cartridge (C/M/Y/K),
PL5.1.18-21
Fuser Assembly, PL6.1.10
MCU Board, PL9.1.20
Image Processor Board, PL9.1.27
Warning
Ensure to wait for the Fuser to cool down before starting the procedure.
Troubleshooting Procedure Table
Step Actions and Questions
1. Check the printing usage.
1
2. Did the user print the same image at
a large volume?
2 1. Print a page including color
photograph. If not possible, perform
CMY20% Test Print:
> Test Print > CMY 20%
2. Does the image quality improve?
1. Check the Transfer Unit.
3
2. Are there any damages on the
Transfer Unit surface?
Example Print
Yes
Go to step 2.
Complete.
Service Mode
ESS.
Replace the
Transfer Unit
(page 8-8).
Phaser 6280 Color Laser Printer Service Manual
Residual Image/Ghosting
No
Go to step 3.
Go to step 3.
Go to step 4.