Firmware Controller Update - Xerox Phaser 6280 Service Manual

Reference

Firmware Controller Update

A-4
1. Down load the applicable files from the Xerox support web site.
2. Ensure your appropriate downloading cable option (Ethernet or USB) is
connected.
3. Reboot the printer.
4. On your computer, locate the downloaded file. Open the Main directory.
Double-click the Xeroxfwup.exe file.
5. The xeroxfwup window with connection options is displayed. Select the
appropriate downloading option (Network or USB). Click the Next button.
6. The xeroxfwup window is displayed.
a. For Network connection:
If your printer IP address is available, select the appropriate box.
Click the Next button.
If your printer IP address in not listed, click the Add button. Enter
your printer IP address. Click the OK button. Select the box with
your printer IP address. Click the Next button.
On the printer Control Panel, messages are displayed from
Receiving data Port 9100
starts updating the firmware.
b. For USB connection:
The xeroxfwup
Select the printer to be updated. Click the Next button.
On the printer Control Panel, messages are displayed from
Receiving data USB
updating the firmware.
A Completed
Caution
Do Not reboot or turn off the printer. The printer will automatically reboot.
7. When the process is completed, the following messages are displayed on
the printer's Control Panel.
Diagnosing... Xerox (TM) Print Cartridge
Processing... Configuration Printing... Please wait...
Calibrating... Ready
8. On your computer, verify that the firmware update has been sent. Click
the Next button. Click the OK button to close the window.
9. Print the Configuration page
and verify the Firmware Version information.
--> Writing... Port 9100
window with the serial number is displayed.
--> Writing... USB
message is displayed on the Control Panel.
(Menu > Information Pgs
Phaser 6280 Color Laser Printer Service Manual
as the printer
as the printer starts
> Configuration)