GSE 60 SERIES Technical Reference Manual page 55

V -O A
IEW NLY CCESS
Access the setup parameters in the view-only mode by pressing [ZERO] +
[SELECT], then [TARE/ENTER].
ú + ó ô
F -E A
ULL DIT CCESS
Access the setup parameters in the full-edit mode by pressing [ZERO] +
[SELECT], then [SELECT] [ZERO] [PRINT] [UNITS] [TARE/ENTER].
ú + ó ó ú ð õ ô
Accessing a Specific parameter
Accessing a specific parameter requires the scale to be in a mode such as
the tare mode that allows numeric entry using the character scroll keys
(see Character Entry on page 5-6). You can then scroll in the desired
parameter number prior to pressing [SELECT]. For example, from the
tare mode
500 ó ó ú ð õ ô
will access P500 directly.
L A & PIN N
IMITED CCESS
Accessing the setup mode using limited access or PIN number access
requires use of the character scroll keys (see Character Entry on page 5-
6) to enter the code. For example,
ú + ó 21353 ô
will access the setup parameters using the GSE default limited access
code. PIN numbers are also entered this way.
N S
AVIGATING ETUP
Once you have entered the setup mode you can move freely through all
parameters to view and/or change any parameter's configuration.
A T
DVANCING HROUGH
Press [SELECT] to advance sequentially through all parameters. Multiple-
instance parameters will be repeated for each enabled instance.
Press [SCALE SELECT] or [.] [SELECT] to move back one parameter.
On the M460 press [PRINT] [SELECT].
A A S
CCESSING PECIFIC
Key in a parameter number and press [SELECT] to access that parameter
directly. For example,
300 ó
(M 460)
ODEL
(M 460)
ODEL
A
UMBER CCESS
P
ARAMETERS
P
ARAMETERS
P
ARAMETER
60 Series Technical Reference Manual
Setup Parameters 3-5
(M 460)
ODEL