Table of Contents
Advertisement
11-6 Chapter 11
GSE Scale Systems
If rows have already been created in a database and you attempt to
redefine the columns, the prompt "CLEAR DBASE" displays briefly
followed by "ENTER toCLR." Press [ENTER] to delete the existing rows in
the database, or any other key to abort the operation.
D
M
ATABASE
When parameter P806 is set for "dbase," the basic Database Menu can be
accessed. To access this menu, you press the [ID] key while the controller
is in one of the weigh modes (any mode below mode 90).
The basic Database Menu provides just four selections of operations. To
view these selections you press the [SELECT] key. To invoke the selected
operation, you can:
•
Simply press the [ENTER] key alone, or
•
Key in an (alpha)numeric entry, and then press the [ENTER] key
The operations listed on the basic Database Menu are considered simple
operations.
More complex operations can be performed, but only by keying in the
proper numeric operation code and pressing the [SELECT] key (see the
chart on the following page).
ENU
Hide quick links:
Advertisement
Table of Contents
