GSE 60 SERIES Technical Reference Manual page 390

9-142 Chapter 9
GSE Scale Systems
18,4;80.4%y
18,4;.80.4%y
18;.23.1%y
18,2;80.1,.80.2%y
The time it takes to sort a database depends on the number of rows in the
database and the complexity of the sort criteria. Macro execution does not
resume until sorting is complete. During the sorting routing, the number of
rows sorted increments on the display. Pressing [CLR] will abort the
sorting process.
%y D A
ATABASE
Syntax Database Auto-Test
19; < 0 | 1 > %y
Arguments
0 Disables Auto-Test
1 Enables Auto-Test
Notes Database Auto-Test is disabled at power-up.
Database Auto-Test
Tests the integrity of the database after each database command is
executed. If enabled, the auto-test adds the number of used and unused
bytes and compares it to the number of bytes available for the database.
If the total does not match, an error is displayed and logged in the macro
debug.
This command is a diagnostic tool that should only be enabled to trouble
shoot database corruption problems. Enabling the auto-test will slow the
execution of database macro commands.
19;1%y
19;0%y
ascending order.
Sorts the column for VAR#4 of database #4
in ascending order.
Sorts the column for VAR#4 of database #4
in descending order.
Sorts the column for the RATE of scale #1 of
the last selected database in descending
order.
Sorts the column for VAR#1 of database #2
in ascending order with a sub-sort of the
column for VAR#2 in descending order.
-T
UTO EST
Enables auto-test.
Disables auto-test.