Setpoint Options - GSE 60 SERIES Technical Reference Manual

10-10 Chapter 10
GSE Scale Systems
This example demonstrates using a setpoint as a timer. Pressing [F2] or
[TARGET] will start the timer. Macro 15 will be invoked after the 15
second timer expires (setpoint 2 deactivates). The time delay may also be
set through a macro. Refer to Chapter 9 for more details.
S O
ETPOINT
The options boards mount in a variety of locations on the different models.
Refer to the Options Installation Chapter 13 for step by step installation
instructions.
PTIONS