Table of Contents
Advertisement
9-94 Chapter 9
GSE Scale Systems
Re-enables the auto-update of weight data on the LCD/LED remote
display. This command would normally be used revert back to a remote
weight display after displaying text.
Disable LCD Remote Display Auto-Update
[ text ] r%d
Disables the auto-update of weight data on the LCD remote display. This
allows you to display alphanumeric data on the remote display using the
text argument.
For example,
PEN 15r%d
or
80.1P="PEN 15"%o
80.1P%or%d
will display a pen location on the remote display. The text will remain on
the display until changed with another r%d command, or until the auto-
update is re-enabled with the R%d command.
Note that the LCD remote display is not capable of displaying all alpha
characters. Choose your text to include only characters that can be
represented in 7-segment style. Any non-displayable LCD character will
be displayed as three horizontal bars. Also note that the LCD remote
display will only display the first 6 characters of a string.
Used without the text argument, the r%d command will "freeze" the
displayed weight.
Disable LED Remote Display Auto-Update
< A|B|C|D|E|F|G|H|I|J > [ text ] r%d
Disables the auto-update of weight data on the LED remote display. This
allows you to display alphanumeric data on the remote display using the
text argument as well as control display features such as scrolling text.
Text will remain on the display until changed with another r%d command,
or until the auto-update is re-enabled with the R%d command.
Note that the LED remote display will only display the first 12 characters of
a string unless the scroll mode is used.
Ar%d
BMix Completer%d
Clears the LED remote display.
Displays "Mix Complete" on the LED
Hide quick links:
Advertisement
Table of Contents
