GSE 60 SERIES Technical Reference Manual page 407

P5003%
Mc 10
4%D%E
[PRINT]
P5003%
Enter
Comm#
1
** Relative Trace Print Time:
Macro 2 ; Start Time:
11%O
Macro 2 ; Start Time:
L134%D
%E
The first line of the debug output shows the relative trace print time, the
time elapsed since the last reset caused by a power up condition or exiting
the setup mode. This is followed by the "blocks" of executed macro code.
Each block begins with a header indicating the macro number, relative
start time and the macro stack count at the time the block was executed.
P "B " D
RINTING RIEF
The macro debug buffer holds a significant amount of data, resulting in a
lengthy debug output. The debug transmission can be shortened by
pressing [UNITS] instead of [PRINT] to print the table in "Brief" mode.
This mode reports only the starting "block" information without the macro
code as shown below.
50001 [SELECT]
P5003%
Mc 10
4%D%E
[UNITS]
P5003%
Enter
Comm#
1
** Relative Trace Print Time:
Macro 2
Range of Offsets: 10001 to 10004; Start Time:
636.160 s **
22.493 s; Stack:
002:0004 if setpoint on
22.510 s; Stack:
002:0033 deactivate setpoint
002:0035 end if
ETAIL
638.864 s **
60 Series Technical Reference Manual
Macros 9-159
0
0
22.493 s; Stack: 0