Account Code Entry - Panasonic KX-TDA100 Features Manual

1.5 Making Call Features

1.5.10 Account Code Entry

Description
An account code is used to identify outgoing trunk calls for accounting and billing purposes.
The account code is appended to the SMDR call record. Therefore, for example, the firm uses
an account code for each client so that the firm can determine what calls were made for the
client, and can submit a bill to the client according to the client's account code on the SMDR
call record.
There are two methods of entering account codes as follows:
One of the methods is selected for each extension on a COS basis (
Mode
Option
Forced
Conditions
• An account code can be stored into Memory Dialling (e.g., One-touch Dialling).
• Account Button
A flexible button can be customised as the Account button. The Account button is used
in place of the feature number for entering an account code. This button is useful because
it can be used at any time, while the feature number entry is allowed only when hearing
a dial tone before seizing a trunk.
• Account code entry after receiving a disconnection signal from a trunk must be done while
hearing reorder tone. Otherwise the SMDR call record is output and entry becomes
impossible afterwards.
• If the account code is entered more than once, the code entered last is printed out in the
SMDR.
• Even in Forced mode, emergency numbers can be dialled out without an account code.
• PT users can also enter an account code for incoming trunk calls during a conversation.
• Verified Code Entry
To identify who made a trunk call for accounting and billing purpose, a verified code is
used. This code can be used at any extension. (
78 Feature Guide
A user can enter an account code if needed at any time desired.
A user must always enter an account code before seizing a trunk so as
not to forget entering the code.
Account Code Mode).
Description
1.7.6 Verified Code Entry)