Panasonic KX-TDA100 Features Manual page 301

Parameter
Main
LLC Information Assigns whether the LLC (Low Level-
Compatibility) Information will be sent to the
network when the ISDN Bearer Mode of an
outgoing call is "Speech" mode.
Sending Status Selects whether to send the Status Message to
Message the ISDN.
Receiving Status Selects the treatment of the call when the
Message Status Message provided by ISDN does not
match the actual status of the call.
CRC4 Mode Assigns whether to use CRC4 for error
checking. CRC (Cyclical Redundancy Check)
is an error checking control technique using a
specified binary prime divisor that results in a
unique reminder. It usually is a 16- to 32-bit
character. (PRI30 only)
Line Coding Selects the PRI line coding type.
(PRI23 only)
Frame Sequence Selects the frame sequence type.
(PRI23 only)
DTMF Duration Selects the duration of the DTMF signals sent
to the ISDN.
DTMF Inter-digit Specifies the DTMF Inter-digit Pause Time.
Pause Time
ISDN Trunk
Subscriber Number Specifies the trunk access number.
Ringback Tone Selects the ringback tone service.
Service
ISDN Outgoing Call Selects the ISDN outgoing call type.
Type
ISDN Centrex Assigns whether the system sends an ISDN
Flash signal to the ISDN during conversation
when pressing the FLASH or EFA button.
CCBS (Completion Assigns whether the system accepts an ISDN
of Calls to Busy Flash signal.
Subscriber)
Description
3.2 PC Programming
Value Range
Enable/Disable
No Transmission/
When error detection
(Mandatory)/
When error detection
(Option/Mandatory)
Ignore/Disconnect/
Forced Disconnect
Enable/Disable
B8ZS/AMI
4-Frame Multiframe
(F4)/12-Frame
Multiframe (F12)/
Extend Multiframe
(ESF)
80/160 ms
64 + 16 × n (n=0–11)
ms
Max. 16 digits
telephone number
Enable/Disable
Overlap/En bloc
Enable/Disable
Enable/Disable
Feature Guide 301