Panasonic KX-TDA100 Features Manual page 154

1.17 Proprietary Telephone (PT) Features
[DWX]
INTERCOM
TALK
CANCEL/
POWER
CLEAR/
TRANSFER
AUTO/OK
SELECT
Navigator Key
Flexible CO (Trunk)
FUNCTION/
KEY-LOCK
UP/DOWN
Soft
A DWX user can use some special features by a combination of buttons (button + a specified
number,
Feature
TONE
WAVESEARCH
154 Feature Guide
Button
CLR
OK
, or #).
Used to change the dialling mode temporarily to tone. (Pulse to
Tone Conversion)
Used to search the best Cell Station on idle status. (Wave
Search)
Used to make or receive intercom calls.
Used to make or receive calls.
Used to end calls, or exit the Directory or Function modes.
Also used to switch the power (ON/OFF) by pressing for
about 5 seconds.
Used to clear incorrect digits while entering numbers in
predialling or to return to the display to the previous step or
group.
And used to transfer a call to another party.
Used for System Speed Dialling and storing programme
changes.
Used to select the displayed function or to call the displayed
telephone number.
Used to adjust the volume and the display contrast or select
desired items for each function.
Used to make or receive a trunk call. F1 button is already
assigned as a L-CO button (Default: L-CO). Pressing this
button seizes an idle line automatically.
F1 to F3 buttons can be used as the desired feature buttons.
(Button assignment is required.)
If the term is in parentheses like (DSS), it means this button
has been made into the "DSS" button.
Used to enter into the Function mode or access features by
pressing additional keys. And used to set "KEYPAD LOCK/
UNLOCK" by pressing for about 2 seconds.
Used to select the ringer volume (seven levels) while on-
hook or ringing, or receiver volume (four levels) during a
conversation. And used to shift the display.
Used to perform the function or operation appearing above
the button at the bottom of the display.
Usage
Usage