Calling Line Identification (Cli) Distribution - Panasonic KX-TDA100 Features Manual

Calling Line Identification (CLI) Distribution

Description
Directs an incoming trunk call to a destination when the caller's identification number (e.g.,
Caller ID) matches the number in the System Speed Dialling Table which is used as the Caller
ID Table. Each Caller ID (System Speed Dialling) number can have its own destination.
CLI Feature
Caller ID
Calling Line Identification
Presentation (CLIP)
Automatic Number
Identification (ANI)
CLI always works in conjunction with the following call distribution methods:
a)
DIL
b)
DID
c)
DDI
d)
MSN Ringing Service
Each trunk (for DIL) and the DID/DDI/MSN number can enable or disable the CLI feature for
each time mode (day/lunch/break/night).
When the call has its Caller ID and the CLI is enabled for the time mode, the call will be
handled by the CLI method.
[Programming Example of System Speed Dialling Table for CLI]
Location
(Speed Dialling No.)
000
001
:
: System Speed Dialling Number
*1
: System Speed Dialling Name
*2
Caller's number is sent from an analogue
trunk.
Caller's number is sent from an ISDN line. • Calling/
Caller's number is sent from an E1 or T1
line.
System Speed System Speed
Dialling No. Dialling Name
*1
901234567890 ABC Company
:
:
1.1 Incoming Call Features
Description
CLI Destination
*2
:
:
Details in
• 1.15.1 Caller
ID
Connected
Line
Identification
Presentation
(CLIP/COLP)
• 1.19.1 E1
Line Service
• 1.20.1 T1
Line Service
200
:
:
Feature Guide 25