Panasonic KX-TDA100 Features Manual page 21

[Programming Example of DID/DDI Table]
DID and DDI use the same table.
Tena
Locat DID/DDI
ion No.
*1
No.
0001 123-4567
0002 123-2468
0003 123-456
: DID Number
*1
: The time mode (day/lunch/break/night) of the programmed tenant is applied to the DID/
*2
DDI number.
: DID Destination
*3
: DID Name
*4
Explanation:
If the DID/DDI number is "123-4567":
1. Checks the number in the table.
Matches the number in location 0001.
2. Checks the time mode.
In Day mode: CLI is enabled. Route to CLI destination.
In Lunch mode: CLI is disabled. Route to DID/DDI destination, extension 100.
The Inter-digit Time:
When the Inter-digit time expires, the PBX stops receiving DID/DDI number and starts to
check the DID/DDI table.
Even if the Inter-digit time does not expire, the PBX stops receiving the DID/DDI number when
the received number is found in the DID/DDI table. The PBX then routes the call to the
corresponding destination. If the received number matches several DID/DDI numbers in the
table, the DID/DDI number of the lowest numbered location has priority.
[Example] If a call is received in Lunch mode;
Received
Number
123-4567 Extn. 100
123-456 Extn. 101
CLI
nt
Lunc Brea
*2
Day
h k
Enab Disa Enab
1
le ble le
Enab Disa Disa
1
le ble ble
Enab Disa Disa
1
le ble ble
Destination
The PBX finds the match in location 0001
in the table after receiving "7". So the call
is routed to extension 100.
The Inter-digit time expired after
receiving "6". The PBX finds the match in
location 0003 in the table. So the call is
routed to extension 101.
1.1 Incoming Call Features
DID/DDI
Destination
Nigh Lun Bre
Day
t ch ak
Disa
105 100 105 100 John White
ble
Disa
102 100 102 100 Tom Smith
ble
Disa
101 101 101 100 A company
ble
Explanation
*3
DID/DDI
Name
*4
Nig
ht
Feature Guide 21