Panasonic KX-TDA100 Features Manual page 297

Hybrid ip pbx

Hide thumbs Also See for KX-TDA100:

Table of Contents

Configuration–Slot–PRI

Protocol Timer

Specifies the slot no.

Specifies the maximum waiting time after

sending the L2 command to the ISDN,

before expecting the reply to it.

Specifies the maximum waiting time after

resending the TEI demanding to the ISDN,

before expecting the reply to it.

Specifies the time to detect no

communication status of L2.

Specifies the maximum waiting time after

making a call to the ISDN, before receiving

the reply to it.

Specifies the maximum time allowed

between each digit on an incoming call.

Applies to the overlap receiving.

Specifies the maximum waiting time after

sending the SETUP message to the ISDN,

before expecting the reply to it.

Specifies the maximum time allowed

between each digit on an outgoing call.

Applies to the overlap sending.

3.2 PC Programming

PBX No.–Slot No.

(Card type is only PRI.)

Feature Guide