Introduction - Panasonic KX-TDA100 Features Manual

3.1 Introduction

3.1 Introduction
These Programming Instructions are designed to serve as an overall system programming
reference for the Panasonic Hybrid IP-PBX. The PBX has a default setting. You can change
the default to meet your requirements. System Programming controls the system features
described in this Feature Guide. It allows the PBX to be customised to the requirements. Only
one person can programme at a time. Another person trying to enter programming mode will
be rejected.
Ways to Programme
There are two programming methods:
•
•
Password Security
A password is required to perform programming for security purposes. Do not disclose the
password. This will avoid unauthorised access and possible fraudulent use of the PBX.
Warning to the Dealer regarding the system password
274 Feature Guide
PC (Personal Computer) programming
PC programming is described in Section 3.2 PC Programming
PT (Proprietary Telephone) programming
PT programming is described in Section 3.3 PT Programming. The extension user
can programme by entering 3 digits programming numbers from the PT.
1.
Please inform the customer of the importance of the password and the possible
dangers.
2.
Please maintain the secrecy of the password. This will avoid unauthorised
access and possible fraudulent use of the PBX.
3.
Please change the password periodically.
4.
We strongly recommend that a password of 10 digits is used for maximum
protection against hackers.
5.
If the system password is forgotten you can examine the backup of the system
programming.
• If you have a backup system data, you can find the password by loading the
backup system data onto the PC and check the password using the
programming tool.
• If you do not have a backup system data, you have to set the PBX to the factory
default and reprogramme it.