Panasonic KX-TDA100 Features Manual page 315

Channel
Parameter
Slot
Channel number
Connection
Command
Subscriber Number
Channel Type
Trunk Attribute
Trunk Dialling Mode
E1 Receiving Type
Receiving Digits
CPC Detection Time—
Outgoing call
CPC Detection Time—
Incoming call
DTMF Duration
Trunk Pulse Speed
Description
Refers to the slot no. (Display only)
Refers to the channel number.
(Display only)
Refers to the status of port connection.
(Display only)
Specifies the operating card command.
Specifies the trunk access number.
Selects the channel type.
Selects the trunk attribute.
Note
It is available only when Channel Type
is "E & M-P" or "E & M-C".
Selects the trunk dialling mode.
Selects the dial type when receiving
incoming call.
Selects the maximum number of digits
accepted on incoming call.
Specifies the CPC signal duration
recognised on outgoing calls
Specifies the CPC signal duration
recognised on incoming calls
Selects the duration of the DTMF time.
Selects the pulse speed.
3.2 PC Programming
Value Range
PBX No.–Slot No.
(E1 designates the
number.)
INS/OUS
INS/OUS
Max. 16 digits
telephone number
Undefined/DR2/
E & M-P/E & M-C
Public/Private
DTMF/Pulse/MFC-R2
Undefined (Same as
Trunk Dialling Mode)/
DTMF/Pulse/MFC-R2
0–7
None/80 × n (n=2–75)
ms
None/80 × n (n=2–75)
ms
80/160 ms
10/20 pps
Feature Guide 315