Flash/Recall/Terminate - Panasonic KX-TDA100 Features Manual

1.9 Conversation Features

1.9.6 Flash/Recall/Terminate

Description
The FLASH/RECALL button (Disconnect mode or Terminate mode) or Terminate button
(Terminate mode) is used when a PT user disconnects the current call and originates another
call without hanging up first. It performs the same function as going on-hook and then going
off-hook.
[Function of Each Mode]
Disconnect Mode: Disconnects the line and the extension user hears the dial tone from the
line used last. For example, if a trunk call is disconnected, the extension user will hear a new
dial tone from the telephone company.
Terminate Mode: Disconnects the line and the extension user hears the dial tone determined
by the Line Preference—Outgoing setting.
Conditions
• FLASH/RECALL Button Mode
One of the following modes can be selected for each extension:
a)
b)
c)
• Terminate Button
A flexible button can be customised as the Terminate button.
• Disconnect Time (Only for Disconnect Mode)
The amount of time between successive accesses to the same trunk is programmable for
each trunk group (
• This feature outputs an SMDR call record, restarts the call timer, inserts the automatic
pause, and checks the TRS/Barring level again.
• If the ARS mode is on, the Terminate mode will be always effective even though the
Disconnect mode has been set.
112 Feature Guide
Disconnect mode
Terminate mode
External Feature Access (EFA) mode. (
LCOT Disconnect Time).
1.9.7 External Feature Access (EFA))