Panasonic KX-TDA100 Features Manual page 58

1.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features
[Available Destination]
Wired Extension (PT/SLT/ISDN Extension/T1-
OPX)
Digital Wireless Extension (DWX)
Incoming Call Distribution Group
DWX Ring Group
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analogue/ISDN Remote Maintenance
Idle Trunk Access no. + Phone no.
Trunk Group Access no. + Phone no.
Other PBX Extension (TIE with no PBX Code)
Other PBX Extension (TIE with PBX Code)
*: If an extension user cannot call certain extensions on a COS basis (
in Section 1.1.2 Internal Call Features—SUMMARY), the FWD feature to the extension
does NOT work.
Conditions
[General]
•
•
•
•
58 Feature Guide
Destination
FWD for Trunk Calls/Intercom Calls
The FWD feature can be set for trunk calls, for intercom calls, or for both of them by
the extension user.
FWD from Incoming Call Distribution Group (Group FWD)
COS programming determines the incoming call distribution groups that can use this
feature.
FWD to Trunk
COS programming determines the extensions or incoming call distribution groups
that can forward calls externally (
The original extension's TRS/Barring and ARS still apply to the forwarded call.
Trunk Call Duration
If a call between an extension user and an outside party, or between two outside
parties is established, the call duration can be restricted by a system timer (
Extension-to-Trunk Call Duration Time and Trunk-to-Trunk Call Duration Time]). If
the timer expires, the line will be disconnected. (
Condition for Original
Availability Extension/Incoming Call
Distribution Group
Only available when FWD to
extension is allowed through
COS programming.*
–
–
Only available when access
to the resource is allowed
through COS programming.
–
Only available when FWD to
trunk is allowed through
COS programming.
–
–
Call Forwarding on Trunk Calls).
1.9.8 Trunk Call Limitation)
Internal Call Block