Panasonic KX-TDA100 Features Manual page 292
Hybrid ip pbx
Hide thumbs
Also See for KX-TDA100:
- Programming manual (912 pages) ,
- Pc programming manual (854 pages) ,
- Features manual (776 pages)
Table of Contents
Advertisement
3.2 PC Programming
Port
Parameter
Slot
Port
Port Type
Connection
Command
Main
LLC Information
Sending Status
Message
Receiving Status
Message
DTMF Duration
DTMF Inter-digit Pause Specifies the DTMF Inter-digit Pause Time. 64 + 16 × n (n=0–11)
292
Feature Guide
Description
Refers to the slot no. (Display only)
Refers to the port no. (Display only)
Selects the port type.
Refers to the status of the port connection.
(Display only)
Specifies the operating card command.
Assigns whether the LLC (Low Level-
Compatibility) Information will be sent to the
network when the ISDN Bearer Mode of an
outgoing call is "Speech" mode.
Selects whether to send Status Message to
the ISDN.
Selects the treatment of the call when the
Status Message provided by ISDN does not
match the actual status of the call.
Selects the duration of the DTMF signals
sent to the ISDN.
Value Range
PBX No.–Slot No.
(BRI designates the
number.)
Trunk line/Extn./
QSIG-Master/
QSIG-Slave
INS/OUS
INS/OUS
Enable/Disable
No Transmission/
When error detection
(Mandatory)/
When error detection
(Option/Mandatory)
Ignore/
Forced Disconnect/
Disconnect
80/160 ms
ms
Advertisement
Table of Contents
