Panasonic KX-TDA100 Features Manual page 187

Parameter
Answer by Switching to VM command +
Mailbox Recording message command
(#6 + H [H = Mailbox No.])
AA Switching to AA command (#8) Switching to AA command (#8)
None (Default) (DTMF commands are not sent. Work with default of the VPS.)
[Example of a) & b)]
Trunk Call
Transfer
Operator
c)
Transferring to a Mailbox of the VPS
An extension user can transfer a call to a mailbox of the VPS so that the caller can
leave a message in the mailbox of the desired extension. The extension user should
use the Voice Mail (VM) Transfer button, when transferring a call to the mailbox of
the VPS. When the extension user presses this button and enters the desired
extension number, the PBX will transfer the call to the VM group and dial the mailbox
number of the desired extension with the required command (after the VPS answers
the call). Therefore the caller can leave a message without knowing the mailbox
number.
Transmitted Command
In AA Service Mode
Sent "#6" + "102".
PBX
Switching to VM command
FWD, Intercept
Extn. 102
1.21 Voice Mail Features
In VM Service Mode
Recording message command
(H [H = Mailbox No.])
mailbox number
VPS (In AA service mode)
VM Port 1
VM (DTMF)
Group
VM Port X
Feature Guide
VM Port 2
VM Port 3
187