Panasonic KX-TDA100 Features Manual page 387

Maintenance–RS-232C Port
Parameter
RS-232C Port Parameter (1–4)
New Line
Baud Rate
Data Bits
Parity
Stop bits
Flow Control
Maintenance–Daily Test Setting
Parameter
Setting
Start Time
Maintenance–External Modem Control
Parameter
External Modem
Command
Maintenance–Power Failure Transfer Control
Parameter
PFT Card Position (1–6)
Trunk Card Slot
Number
Extension Card Slot
Number
The same number for each of the trunk and extension card is not available.
*1
Description
Selects the new line code.
Selects the baud rate.
Selects the word length.
Selects the parity bit.
Selects the stop bit.
Selects the flow control type.
Description
Assigns testing.
Specifies the start time of testing.
Description
Specifies the external modem command for
the initial setting.
Description
Specifies the trunk card location.
Specifies the extension card location.
3.2 PC Programming
Value Range
CR + LF/CR
2400/4800/9600/
19200/38400/57600/
115200 bps
7/8
None/Mark/Space/
Even/Odd
1/2
None/Hardware/
(Xon/Xoff)
Value Range
Enable/Disable
00:00–23:59
Value Range
Max. 80 characters
consisting of 0–9, A–Z,
a–z or the other marks
Value Range
1–11
*1
1–11
*1
Feature Guide 387