Panasonic KX-TDA100 Features Manual page 290

3.2 PC Programming
Parameter
ISDN
Extension
290 Feature Guide
T200 Specifies the maximum waiting time after
sending the L2 command to the ISDN,
before expecting the reply to it.
T201 Specifies the maximum waiting time after
resending the TEI check request to the
ISDN, before expecting the reply to it.
T203 Specifies the maximum time to detect no
communication status of L2.
T301 Specifies the maximum waiting time after
making a call to the ISDN, before receiving
the reply to it.
T302 Specifies the maximum time allowed
between each digit on an incoming call.
Applies to the overlap sending.
T303 Specifies the maximum waiting time after
sending the Setup message to the ISDN,
before receiving the reply to it.
T304 Specifies the maximum time allowed
between each digit on an outgoing call.
Applies to the overlap dialling.
T305 Specifies the maximum waiting time after
sending the DISC message to the ISDN,
before expecting the reply to it.
T306 Specifies the maximum waiting time after
sending the DISC message to the ISDN,
before expecting the reply to it. This setting
is used when inband tone is supplied.
T307 Specifies the maximum waiting time after
Suspending, before restarting.
T308 Specifies the maximum waiting time after
sending the Release message to the ISDN,
before expecting the reply to it.
T309 Specifies the maximum time that the
system tries to disconnect the data link,
before saving the call.
Description Value Range
*0–600 s
*0–600 s
*0–600 s
*0–18000 s
*0–600 s
*0–600 s
*0–3000 s
*0–3000 s
*0–3000 s
*0–6000 s
*0–600 s
*0–3000 s