Panasonic KX-TDA100 Features Manual page 299

Parameter
ISDN T200
Extension
T201
T203
T301
T302
T303
T304
T305
T306
T307
T308
T309
Description
Specifies the maximum waiting time after
sending the L2 command to the ISDN,
before expecting the reply to it.
Specifies the maximum waiting time after
resending the TEI check demanding to the
ISDN, before expecting the reply to it.
Specifies the time to detect no
communication status of L2.
Specifies the maximum waiting time after
making a call to the ISDN, before expecting
the reply to it.
Specifies the maximum time allowed
between each digit on an incoming call.
Applies to the overlap receiving.
Specifies the maximum waiting time after
sending the SETUP message to the ISDN,
before expecting the reply to it.
Specifies the maximum time allowed
between each digit on an outgoing call.
Applies to the overlap sending.
Specifies the maximum waiting time after
sending the DISC message to the ISDN,
before expecting the reply to it. (No tone/
announce)
Specifies the maximum waiting time after
sending the DISC message to the ISDN,
before receiving the reply to it. This setting
is used when inband tone is supplied.
Specifies the time that the system waits
after Suspending, before restarting.
Specifies the maximum waiting time after
receiving the Release message to the
ISDN, before expecting the reply to it.
Specifies the time that the system tries to
disconnect the data link, before saving the
call.
3.2 PC Programming
Value Range
*0–600 s
*0–600 s
*0–600 s
*0–18000 s
*0–600 s
*0–600 s
*0–3000 s
*0–3000 s
*0–3000 s
*0–6000 s
*0–600 s
*0–3000 s
Feature Guide 299