Panasonic KX-TDA100 Features Manual page 138

1.14 Optional Device Features
Security
Mode
Trunk
Security
No
Security
If trunk call is available, Account Code Entry is also available.
Security Mode Override:
If the caller operates with the following features while hearing a DISA message, the security
mode can be changed to the No Security mode temporarily:
•
•
After changing mode, the mode remains in force for the duration of the call.
Available PBX Features with Security Mode Override:
After Security Mode Override is done with the Remote COS Access feature, the following
features are available (It regards a remote operation from the assigned extension):
•
•
•
•
•
•
DISA Intercept Routing—Busy/DND
If the destination called by the outside party is busy or in DND mode, and if (1) the busy
destination does not set Call Waiting, FWD, or Idle Extension Hunting or (2) the destination is
in DND mode and Idle Extension Hunting is not available, one of the following can be selected
through system programming:
a)
b)
c)
138 Feature Guide
Intercom
Without PBX
Call
Remote COS Access: Remote COS Access feature number + extension number +
personal password
Verified Code Entry: Verified Code Entry feature number +
verified code password
FWD
DND
Log-in/Log-out
Absent Message
Extension Lock
Time Service Mode Switch
Busy Tone: Busy tone is sent to the caller.
Intercept Routing: Intercept Routing—Busy/DND (
1.1.1 Incoming Trunk Call Features—SUMMARY) will work and the call will be
redirected to the preprogrammed destination.
Outgoing Message (OGM): An outgoing message (OGM) will be sent to the caller.
The message for busy/DND mode can be assigned for each outgoing message
(OGM) which has a DISA floating extension number.
TIE Line Call
With PBX
Code Code
Trunk Call
+ verified code +
Intercept Routing in Section