Panasonic KX-TDA100 Features Manual page 147

[Example]
Location
Dialling No.)
:
*1
:
*2
3.3 Caller's Name Reference
A name can also be shown on the display or SMDR. The PBX searches for the name
in the following order:
1) Personal Speed Dialling data of the original called extension
2) System Speed Dialling (Caller ID) Table of the tenant
3) Caller ID name received from the public line (Caller ID Name Reference)
If the name is not found, it will not be displayed.
Conditions
• Hardware Requirement: The LCOT Card and CID Card for calls from analogue trunk.
• Caller ID signalling type can be selected through system programming (
Signal Type).
• The Caller ID Name Reference is only available for calls from the public network.
System Speed Dialling
(Speed
000 90123456789
001
:
System Speed Dialling Number
System Speed Dialling Name
System Speed Dialling
No.
*1
ABC Company
:
:
1.15 Caller ID Features
Name. Destination
*2
:
:
Caller ID
Feature Guide
CLI
200
:
:
147