Panasonic KX-TDA100 Features Manual page 284

3.2 PC Programming
Configuration–Slot–LCOT
Common
Parameter
Slot
Outgoing Guard Time
First Dial Time (Trunk) Specifies the minimum waiting time after
Tone Feed Back
Ring Detection
Ring Start Detection
Time
Ring Off Detection
Time
Pulse/DTMF (Dual Tone Multi-Frequency) Dialling
DTMF Inter-digit Pause
Time
Pulse Inter-digit Pause
Time
Low Speed Pulse Dialling
Pulse % Break
Break Width
Make Width
High Speed Pulse Dialling
Pulse % Break
Break Width
Make Width
Pulse Type
284 Feature Guide
Description
Specifies the slot no.
Specifies the length of outgoing guard time
after receiving Reverse/Alert signal.
seizing the trunk line before sending dialled
digits.
Assigns whether to turn on or off the tone
feedback.
Specifies the minimum duration for the
starting ring detection.
Specifies the minimum duration for the
finishing ring detection.
Specifies the DTMF Inter-digit Pause Time. 64–304 ms
Selects the Pulse Inter-digit Pause Time.
Selects the % break for pulse digits.
Specifies the width of Break signal.
Specifies the width of Make signal.
Selects the % break for pulse digits.
Specifies the width of Break signal.
Specifies the width of Make signal.
Selects the pulse dialling signal type.
Value Range
PBX No.–Slot No.
(Card type is only
LCOT.)
3–6 s
0.5–8.0 s
Yes/No
24–1200 ms
1.0–15.0 s
630/830/1030 ms
Other/60/67 %
24–80 ms
12–60 ms
Other/60/67 %
16–72 ms
12–60 ms
Normal/Sweden/
New Zealand