Flexible Numbering/Fixed Numbering - Panasonic KX-TDA100 Features Manual

2.3.5 Flexible Numbering/Fixed Numbering

Description
To dial another extension user or to access PBX features, the access numbers (extension
numbers or feature numbers) are required.
There are three types of numbering plans:
1) Flexible Numbering (available while a dial tone is heard)
2) Flexible Numbering (available while busy, DND, or ringback tone is heard)
3) Fixed Numbering (available while dialling or talking)
1.
Flexible Numbering (available while a dial tone is heard)
Extension numbers and feature numbers which are available while a dial tone is heard
can be customised for easy use (
It is also possible to use default (Pattern 1 or Pattern 2) shown in the following table:
a)
b)
[Flexible Numbering Table (available while a dial tone is heard)]
Location
Extension numbers (Location numbers 1 through 32): Up to five-digit number
including the extension numbering scheme (up to three-digits number consisting of
"0 through 9" ) + additional digits (up to two digits, default: two digits)
[Example]
If the number "3" as a 1st extension numbering scheme and the "2" as an additional
digit have been programmed, the extension number 300 through 399 are available.
Feature numbers (Location numbers 33 through 250): Up to four-digit number
consisting of "0 through 9", " ", and "#"
No.
1 Extension numbering scheme -1
2 Extension numbering scheme -2
3 Extension numbering scheme -3
4 Extension numbering scheme -4
5 Extension numbering scheme -5
6 Extension numbering scheme -6
7-32 Extension numbering scheme -7-32
33 Operator Call
34 Idle Trunk Access/ARS
35 Trunk Group Access
36 TIE Line Access
Flexible Numbering). The numbers must not conflict.
Feature
2.3 System Data Control
Default
Pattern 1 Pattern 2
(with ) (without
1 1
2 2
3 None
4 None
5 None
6 None
None None
9 / 0 9 / 0
0 / 9 0 / 9
8 8
7 None
Feature Guide
)
261