Panasonic KX-TDA100 Features Manual page 352

3.2 PC Programming
Group–Paging Group–Assign Output
Parameter
Paging Group (1–32)
Output (1–8)
Paging Group
Group–Paging Group–Assign Outgoing Message (OGM)
Parameter
Paging Group (1–32)
Outgoing Message
(OGM)
Group–Incoming Call Distribution Group
Group–Incoming Call Distribution Group–Group
Parameter
Incoming Call Distribution Group (1–64)
Floating Extension
Number
Group Name
Type
Basic
Call Waiting
Distribution
Call Forwarding (FWD)
Mode
Do Not Disturb (DND)
Mode
Tenant Number
COS Level
CLIP/COLP
352 Feature Guide
Description
Specifies whether output port belongs to
the paging group.
Description
Specifies the outgoing message number for
emergency paging.
Description
Specifies the floating extension number.
Specifies the incoming call distribution
group name.
Selects the group type for each incoming
call distribution group.
Selects the way to distribute Call Waiting.
Selects if the extension rings when a call
reaches the group if FWD is set.
Selects if the extension rings when a call
reaches the group if DND is set.
Specifies the tenant which you are going to
programme.
Specifies the COS level.
Specifies the CLIP/COLP number used for
the incoming call.
Value Range
Double click to enable
Value Range
None/1–64
Value Range
Extension Number
Max. 20 characters
Ring/UCD/Hunt
All/Destination
Skip/Ring
Skip/Ring
1–8
1–64
Max. 16 digits