Panasonic KX-TDA100 Features Manual page 361

Parameter
Option 2
Call Pickup Deny
Executive Busy
Override Deny
Incoming Call Log Lock Assigns whether to lock the incoming call
Paging Deny
CLIP/COLP
CLIR
COLR
Wireless XDP Parallel
Mode
Option 3 (PT)
Preferred Line—
Outgoing
Preferred Line—
Incoming
On-hook Dial Mode
Intercom Alerting
Call Waiting Tone Type Selects the type of Call Waiting tone for PT
Live Call Screening
Recording Mode
Live Call Screening
Answer Mode
Headset Set
Description
Assigns Call Pickup Deny mode.
Assigns Executive Busy Override Deny
feature.
log.
Assigns the Paging Deny feature.
Specifies the CLIP/COLP number.
Assigns the CLIR (Calling Line
Identification Restriction) feature.
Assigns the COLR (Connected Line
Identification Restriction) feature.
Sets up Wireless XDP Parallel Mode to
work with a wired telephone.
Selects the line to which the extension is
connected automatically when making a
call.
Selects which line the extension is
connected automatically when answering a
call.
Selects the operation when dialling in on-
hook status.
* This program is not intended for DWX.
Selects the intercom alerting mode.
* This program is not intended for DWX.
extensions.
Selects whether to close the mailbox or
keep recording the conversation after a call
is interrupted.
Selects whether the voice message being
recorded is monitored automatically
through the built-in speaker (Hands-free
mode) or an alarm tone is sent (Private
mode) while an incoming caller is leaving a
message in the mailbox of the extension.
* This program is not intended for DWX.
Selects headset mode.
* This program is not intended for DWX.
3.2 PC Programming
Value Range
set/cancel
set/cancel
Unlock/Lock
set/cancel
Trunk line/Extension
Enable/Disable
Enable/Disable
None/Extension
Number
No Line/Idle/
INTERCOM/Flexible
key 1–36
No Line/Ringing Line/
Flexible key1–36
Predial/Hot Key Dial
Tone Call/Voice Call/
Voice Call Deny
Call Waiting Tone/
Ringing tone
Stop Recording/Keep
Recording
Hands-free/Private
On/Off
Feature Guide 361