Panasonic KX-TDA100 Features Manual page 311

Parameter
E & M-P Pulse Length
Seizure
Answer
Clear
E & M-P Seizure ACK
Metre Pulse Detection for DR2
Mode
Bit Position
Length
DSP (Digital Signal Processor) Gain Adjustment
DTMF Transmitting
DTMF Receiving
MFC-R2 Transmitting
MFC-R2 Receiving
Frame Error Detection
Error Detection
Error Rate
Description
Selects the length of the Seizure signal.
Selects the length of the Answer signal.
Selects the length of the Clear signal.
Assigns whether the system waits for the E
& M-P Seizure ACK signal.
Selects whether to detect the Metre Pulse
signal transmitted from the telephone
company.
Selects the bit position of the Metre Pulse. A-bit/B-bit/C-bit/D-bit
Specifies the duration time the system will
recognise as a Metre Pulse signal.
Specifies the output power of the DTMF
signals.
Specifies the threshold of DTMF detection. -42–0, -41–0, -40–0, –
Specifies the output power of the MFC-R2
signals transmitted from the DSP.
Specifies the threshold of MFC-R2 signal
detection.
Assigns whether the system detects frame
synchronisation problems.
Note
"Yes" setting enables the Error Rate
programming.
Specifies the number of frame errors per
second which the system requires to trigger
a remote alarm.
3.2 PC Programming
Value Range
150/600 ms
150/600 ms
150/600 ms
Yes/No
No Detection/
Outgoing call only/
Both Incoming and
Outgoing calls
8–640 ms
(N=1–80, N × 8 ms)
3, 2, 1, 0, -1– -12 dB
(3-N dB, N=0 –15)
-11–0 dB
(N-42–0dB, N=0 –31)
0, -1, -2, -3 – -31 dB
(-N dB, N=0 –31)
-38–0, -37–0, -36–0 –
-23–0 dB
(N-38–0 dB N=0–15)
Yes/No
No limit/
16 errors per second/
32 errors per second/–/
112 errors per second/
(16 × N, N=0 –7)
Feature Guide 311