Panasonic KX-TDA100 Features Manual page 320

3.2 PC Programming
Configuration–Slot–Extension
Common
Parameter
Slot
KX-T7250 Transfer/
Hold Key Mode
SLT Pulse Dialling
Mode
SLT Off-hook Time
SLT Off-hook Guard
Time
SLT Pulse Maximum
Break Width
SLT Pulse Minimum
Make Width
SLT Flash Detection
Hooking Flash Time—
Min.
Hooking Flash Time—
Max.
Minimum DTMF
Detection Time
SLT Power Supply
320 Feature Guide
Description
Specifies the slot no.
Selects T7250 Transfer/Hold Key Mode.
Selects the digit translation appropriate to
your area.
Specifies the minimum time that the system
will recognise as an off-hook signal sent
from the SLT.
Specifies the length of guard time
preventing the system from mistaking an
off-hook signal as a dial.
Specifies the maximum Pulse Break Width. 8 × n (n=9–120) ms
Specifies the minimum Pulse Make Width. 8 × n (n=1–5) ms
Assigns the detection of a flash signal.
Specifies the minimum duration of a flash
signal.
Specifies the maximum duration of a flash
signal.
Specifies the minimum to defect the DTMF
tone.
Selects the power supply voltage of the
SLT.
Value Range
PBX No.–Slot No.
(Card type is only
extension.)
Mode1/Mode2
(NE/SL/FR Reverse)
Normal/Sweden/
New Zealand
8 × n (n=3–255) ms
8 × n (n=12–63) ms
Enable/Disable
8 × n (n=3–63) ms
8 × n (n=3–191) ms
2 × n (n=1–31) ms
85 V/145 V