YASKAWA T1000V Technical Manual page 292

7.5 Drive Replacement
1.
Loosen the screw on the front of the drive and remove the front cover.
Figure 7.5
2.
Pull the pin on the ground terminal out of the removable terminal block.
Figure 7.6
3.
Push down the installation pin on the terminal board with a screwdriver
4.
While holding down the locking pin from step 3, slide the removable terminal block in the direction of the arrows
in Figure 7.7.
Figure 7.7
292
Figure 7.5 Remove Front Cover
Pull out the
ground terminal
pin in the direction
indicated by
the arrow.
Cable
Terminal
Figure 7.6 Depress Plastic Tab
Figure 7.7 Removing the Terminal Board
YASKAWA ELECTRIC SIEP C710606 44B YASKAWA AC Drive T1000V Technical Manual
Push down
the terminal
board locking
pin with a
screwdriver.