Siemens SINUMERIK 828D Function Manual page 502

K1: Mode group, channel, program operation, reset response
9.5 Program test
Selection
This function is selected via the operator interface in the "Program control" menu.
The selection sets the following interface signal:
DB21, ... DBX26.0 (skip block selected)
This does not activate the function.
Activation
The function is activated via the interface signal:
DB21, ... DBX2.0 (activate skip block)
Note
The "Skip part programs" function remains active during block searches.
Display
Activated "Skip block" function is indicated by a reversal of the relevant field on the operator interface.
502
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Basic Functions