Siemens SINUMERIK 828D Function Manual page 627

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Execute from local drive

Main program:

Program code

N010 PROC MAIN

N030 EXTCALL ("ROUGHING")

External subprogram:

Program code

N010 PROC ROUGHING

N020 G1 F1000

N030 X= ... Y= ... Z= ...

The "MAIN.MPF" main program is stored in NC memory and is selected for execution.

The "SCHRUPPEN.SPF" or "SCHRUPPEN.MPF" subprogram to subsequently loaded is on the local drive in the

directory "/user/sinumerik/data/prog/WKS.DIR/WST1.WPD".

The subprogram path is preset in SD42700:

SD42700 $SC_EXT_PROG_PATH = "LOCAL_DRIVE:WKS.DIR/WST1.WPD"

Without the path being specified in the SD42700, the EXTCALL operation for this example

would have to be programmed as follows:

EXTCALL("LOCAL_DRIVE:WKS.DIR/WST1.WPD/SCHRUPPEN")

Basic Functions

Function Manual, 09/2011, 6FC5397-0BP40-2BA0

K1: Mode group, channel, program operation, reset response

9.13 Program control

Sinumerik 840d sl