Event Counter Cntggio - ABB REL650 Applications Manual

1MRK 506 334-UUS A
14.5
14.5.1
14.5.2
14.5.3
Application manual
Table 22: Settings for calibration parameters
Setting Short Description
IMagComp5
Magnitude factor to calibrate
current at 5% of In
IMagComp30 Magnitude factor to calibrate
current at 30% of In
IMagComp100
Magnitude factor to calibrate
current at 100% of In
VAmpComp5 Magnitude factor to calibrate
voltage at 5% of Vn
VMagComp30
Magnitude factor to calibrate
voltage at 30% of Vn
VMagComp100
Magnitude factor to calibrate
voltage at 100% of Vn
IAngComp5 Angle calibration for current at 5%
of In
IAngComp30
Angle pre-calibration for current
at 30% of In
IAngComp100
Angle pre-calibration for current
at 100% of In

Event counter CNTGGIO

Identification
Function description
Event counter
Application
Event counter (CNTGGIO) has six counters which are used for storing the number of
times each counter has been activated. CNTGGIO can be used to count how many times
a specific function, for example the tripping logic, has issued a trip signal. All six counters
have a common blocking and resetting feature.
Setting guidelines
Operation: Sets the operation of Event counter (CNTGGIO) Enabled or Disabled.
Selected Comments
value
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
IEC 61850 IEC 60617
identification identification
CNTGGIO
S00946 V1 EN
Section 14
Monitoring
ANSI/IEEE C37.2
device number
-
437