1MRK 506 334-UUS A
17.7
17.7.1
17.7.2
17.7.2.1
Application manual
Use only characters A - Z, a - z and 0 - 9 in station, unit and object names.
Product information PRODINF
Identification
Function description
Product information
Application
Factory defined settings
The factory defined settings are very useful for identifying a specific version and very
helpful in the case of maintenance, repair, interchanging IEDs between different
Substation Automation Systems and upgrading. The factory made settings can not be
changed by the customer. They can only be viewed. The settings are found in the local
HMI under Main menu/Diagnostics/IED status/Product identifiers
The following identifiers are available:
•
IEDProdType
•
Describes the type of the IED (like REL, REC or RET). Example: REL650
•
ProductVer
•
Describes the product version. Example: 1.2.3
1 is the Major version of the manufactured product this means, new platform of the product
2 is the Minor version of the manufactured product this means, new functions or new hardware
added to the product
3 is the Major revision of the manufactured product this means, functions or hardware is either
changed or enhanced in the product
•
ProductDef
•
Describes the release number, from the production. Example: 1.2.3.4 where;
1 is the Major version of the manufactured product this means, new platform of the product
2 is the Minor version of the manufactured product this means, new functions or new hardware
added to the product
IEC 61850
IEC 60617
identification
identification
PRODINF
-
Section 17
Basic IED functions
ANSI/IEEE C37.2
device number
-
477